Universal Speedball Monitor Arm (3 Inch)

Universal Speedball Monitor Arm (3 Inch) is an articulating arm with combination 1/4-20 and 3/8-16 mounting screws on each end, two double-ball clamps, and one 3 inch (75mm) extension with velcro cable wrap. Each ball end contains both mounting thread standards. Push the 3/8-16 outer screw down to reveal the hidden 1/4-20. Install the ball with the cam-lever in the down position to finger-tight, then lift the lever to add extra locking force to the assembly. The extra force of the cam-lever design allows the arm to lock in place without the use of messy rubber pads. The "Chip Clip" clamp design allows for easy, annoyance-free installation, and the ratcheting thumbscrew can be pulled out and repositioned. 3 inch arm has pass-through holes for 1/4-20 and 3/8-16 screws. Universal Speedball components are compatible with any other brand of 1 inch (25mm) ball attachment like Ultralight Control Systems, Wooden Camera, etc.
Universal Speedball Monitor Arm (3 Inch) is an articulating arm with combination 1/4-20 and 3/8-16 mounting screws on each end, two double-ball clamps, and one 3 inch (75mm) extension with velcro cable wrap. Each ball end contains both mounting thread standards. Push the 3/8-16 outer screw down to reveal the hidden 1/4-20. Install the ball with the cam-lever in the down position to finger-tight, then lift the lever to add extra locking force to the assembly. The extra force of the cam-lever design allows the arm to lock in place without the use of messy rubber pads. The Chip Clip clamp design allows for easy, annoyance-free installation, and the ratcheting thumbscrew can be pulled out and repositioned. 3 inch arm has pass-through holes for 1/4-20 and 3/8-16 screws. Universal Speedball components are compatible with any other brand of 1 inch (25mm) ball attachment like Ultralight Control Systems, Wooden Camera, etc.   Product Weight: 11.10oz (314g)Product Dimensions (WxLxH): 2.50 x 1.00 x 10.75in (63 x 25 x 273mm)

Universal Speedball Monitor Arm (3 Inch) is an articulating arm with combination 1/4-20 and 3/8-16 mounting screws on each end, two double-ball clamps, and one 3 inch (75mm) extension with velcro cable wrap. Each ball end contains both mounting thread standards. Push the 3/8-16 outer screw down to reveal the hidden 1/4-20. Install the ball with the cam-lever in the down position to finger-tight, then lift the lever to add extra locking force to the assembly.

Universal Speedball Monitor Arm (3 inch) by MID49

This triple monitor desk mount is a great addition to an ergonomic workspace and provides the luxury of more desk room for other office essentials. Each VESA head bracket is compatible with 75mm x 75mm and 100mm x 100mm displays, and can hold 42.9 lbs. Swivel your monitors up to 180 degrees for a portrait or landscape orientation, and tilt up or down 90 degrees.

Mount-It! Triple Monitor Mount with USB Port - Silver

MOUNT PRO Triple Monitor Desk Mount - Articulating Gas Spring Monitor Arm, Removable with Clamp and Grommet Base - Fits 13 to 27 Inch LCD Computer Monitors, VESA 75x75, 100x100 : Electronics

MID49 Universal Speedball Monitor Arm (3 Inch) Review - Newsshooter

Triple Monitor Mount with Articulating Arms

Universal Speedball Monitor Mount is an articulating arm with combination 1/4-20 and 3/8-16 mounting screws on each end and one double-ball clamp. Each ball end contains both mounting thread standards. Push the 3/8-16 outer screw down to reveal the hidden 1/4-20. Install the ball with the cam-lever in the down position to finger-tight, then lift the lever to add extra locking force to the assembly.

Universal Speedball Monitor Mount by MID49

MID49 Universal Speedball Monitor Arm (3 Inch) Review - Newsshooter

Buy - MID49 M49-SPD-ARM-3 (M49SPDARM3) Universal Speedball Monitor Arm 3 in

Buy - MID49 M49-SPD-ARM-0 (M49SPDARM0) Universal Speedball Monitor Mount

MID49 Universal Speedball Monitor Arm (3 Inch) Review - Newsshooter