Free STL file Shelly 1 and Wago holder 🔧・3D printable model to download・Cults

Caution The following work should not be carried out without electrical knowledge. I'm not responsible for any damage caused. Everything you do is done at your own risk. Unplug the power cord before opening the printer. BOM 2x Spade Connectors 2x Nut M3 M3x min 12mm Socket Head Cap Screw 2x Wago 221-413 1x Shelly 1 configured Assembly The holder attaches to the inside of the Y-axis limit switch holes. You have to remove the limit switch beforehand. The existing screws must be replaced with longer ones. Options If you control the printer via Octoprint you can use the two plugins PSU Control and PSU Control - Shelly to switch the printer on and off.

shelly dimmer 3D Models to Print - yeggi

STL file Shelly 1PM PLUS case ➕・3D printer model to download・Cults

wago 221 power distribution 3D Models to Print - yeggi - page 19

Free 3D file Shelly 1, 1PM, 1 Plus and 1 PM Plus Stand Alone Box ➕・3D print model to download・Cults

Free STL file Shelly 1 and Wago holder 🔧・3D printable model to download・ Cults

Free STL file Shelly 1/PM Mount for GIRA System 55 Switches 👽・3D printing template to download・Cults

STL file Shelly 1PM PLUS case ➕・3D printer model to download・Cults

Shelly 1 - Wago holder by eMJay_3D, Download free STL model

shelly din rail 3D Models to Print - yeggi

STL file Shelly 1

shelly dimmer 3D Models to Print - yeggi

shelly 1pm 3D Models to Print - yeggi

Free STL file Shelly 1 and Wago holder 🔧・3D printable model to download・ Cults