Ventilation: Shelly 2.5 with 3-level switch - ESPHome - Home

Hi, I’ve created a yaml config file for the following config: Venitlation unit (in my case a Storkair WHR 930), controlled via a Perilex Plug Old-fashioned 3-level switch to control the ventilation unit Shelly 2.5 to controll/influence the 3-level switch These ventilation units are controlled relatively simple: -when L1 is live/hot, the ventilation unit goes to medium -when L2 is live/hot, the ventilation unit goed to high -when L1 and L2 are not live, the ventilation unit goes to low -i

Which smart switch is needed? - #24 by stevemann - Hardware - Home Assistant Community

Shutters and Blinds - Tasmota

Shelly with ESPHome: OTA Rollback to Shelly? - ESPHome - Home Assistant Community

Shelly 2.5: Flash ESPHome Over The Air!

Shelly 2.5: Flash ESPHome Over The Air!

Home Assistant and ESPHome automatically ventilate my home when CO2 levels are high : r/homeassistant

Shelly 2.5: Flash ESPHome Over The Air!

Smart lights behind a wall switch (Shelly + ESPHome)

Shelly 2.5

24 VDC 3 wire ball valve with Shelly 2.5 - Configuration - Home Assistant Community

Zehnder ComfoAir CA350 integration via serial connection (RS232) and MQTT - #241 by adorobis - Share your Projects! - Home Assistant Community